Tools

LEADER 03424cam a2200577 a 4500

001 ocm32035607;

005 20260511155612.0;

008 950222s1974 dcuade b f000 0 eng d;

035 a| (OCoLC)32035607;

049 a| ERE#;

074 a| 0473-C-01;

086 0 a| EP 7.10:M 56/NO.1-2/974;

245 00 a| Upgrading metal-finishing facilities to reduce pollution.;

250 a| Rev.;

260 a| Washington, D.C. :b| Environmental Protection Agency, Technology Transfer,c| 1973, [i.e. 1974];

300 a| volumes :b| illustrations, charts, plans ;c| 28 cm.;

336 a| textb| txt2| rdacontent;

337 a| unmediatedb| n2| rdamedia;

338 a| volumeb| nc2| rdacarrier;

490 1 a| EPA technology transfer seminar publication;

500 a| "July 1973.";

500 a| "Revised January 1974"--page [ii].;

500 a| EPA 625/3-73-002B, per NSCEP's publication title list.;

500 a| "The introduction and chapter 1 of this publication were prepared by Alan E. Olsen ... Chapters II and III were prepared by Edward N. Hanf"--No. 1, Acknowledgments, page [ii].;

500 a| "Materials for the publication were prepared by Dr. L.E. Lancy ... and Mr. R.L. Rice"--No. 2, Acknowledgments, page [ii].;

500 a| This is a publication issued by the United States federal government or produced with federal funds.;

500 a| In scope of the U.S. Government Publishing Office Cataloging and Indexing Program (C&I) and Federal Depository Library Program (FDLP).;

500 a| GPO Historic Shelflist Project- publication not in hand.;

504 a| Includes bibliographical references.;

505 1 a| [no.] 1. In-process pollution abatement -- [no.] 2. Waste treatment.;

650 0 a| Factory and trade wastex| Economic aspects.=| ^A6287;

650 0 a| Electroplatingx| Waste disposalx| Economic aspects.=| ^A61481;

650 7 a| Factory and trade wastex| Economic aspects.2| fast0| (OCoLC)fst00919727;

700 1 a| Olsen, Alan E.0| http://id.loc.gov/authorities/names/n88662911=| ^A1281854;

700 1 a| Lancy, Leslie E.0| http://id.loc.gov/authorities/names/no2008166019=| ^A1190652;

700 1 a| Hanf, Edward N.0| http://id.loc.gov/authorities/names/n88662913?| UNAUTHORIZED;

775 08 i| Revision of:t| Upgrading metal-finishing facilities to reduce pollution.d| Washington, D.C. : U.S. Environmental Protection Agency, Technology Transfer, 1973w| (OCoLC)5124167;

776 08 i| Online version:t| Upgrading metal-finishing facilities to reduce pollution.b| Rev.w| (OCoLC)1114289223;

830 0 a| Seminar publication.0| http://id.loc.gov/authorities/names/n86725268=| ^A429502;

949 a| EP 6.2:UR 1/PT.1-4w| sudoch| joyner38o| jjlm;

994 a| C0b| GPO;

955 a| Historic Shelflist Drawer 765; HSL004; 20260511;

955 a| Historic Shelflist; Drawer 315; LAC87;

955 a| Historic Shelflist Drawer 315; HSL004; 20260415;

957 a| VEND01b| 20260529;

596 a| 1;

998 a| 3504564;

999 a| EP 7.10:M 56/NO. 1/974w| SUDOCc| 1i| 30372015889824l| JDOSm| JOYNERr| Ys| Yt| JDOSBKu| 8/19/2014x| BOOKz| JFEDDOCSo| .STAFF. jlhb;

999 a| EP 7.10:M 56/NO. 2/974w| SUDOCc| 1i| 30372015889840l| JDOSm| JOYNERr| Ys| Yt| JDOSBKu| 8/19/2014x| BOOKz| JFEDDOCSo| .STAFF. jlhb;

Upgrading metal-finishing facilities to reduce pollution.

Format	Book
Edition	Rev.
Publication Info	Washington, D.C. : Environmental Protection Agency, Technology Transfer, 1973, [i.e. 1974]
Description	volumes : illustrations, charts, plans ; 28 cm.
Subjects	Factory and trade waste--Economic aspects. Electroplating--Waste disposal. --Economic aspects.

Other author/creator	Olsen, Alan E. http://id.loc.gov/authorities/names/n88662911
Other author/creator	Lancy, Leslie E. http://id.loc.gov/authorities/names/no2008166019
Other author/creator	Hanf, Edward N. http://id.loc.gov/authorities/names/n88662913
Other author/creator	United States. Environmental Protection Agency. Office of Technology Transfer. http://id.loc.gov/authorities/names/n80165358
Series	EPA technology transfer seminar publication Seminar publication. http://id.loc.gov/authorities/names/n86725268 ^A429502
Incomplete content	[no.] 1. In-process pollution abatement -- [no.] 2. Waste treatment.
General note	"July 1973."
General note	"Revised January 1974"--page [ii].
General note	EPA 625/3-73-002B, per NSCEP's publication title list.
General note	"The introduction and chapter 1 of this publication were prepared by Alan E. Olsen ... Chapters II and III were prepared by Edward N. Hanf"--No. 1, Acknowledgments, page [ii].
General note	"Materials for the publication were prepared by Dr. L.E. Lancy ... and Mr. R.L. Rice"--No. 2, Acknowledgments, page [ii].
General note	This is a publication issued by the United States federal government or produced with federal funds.
General note	In scope of the U.S. Government Publishing Office Cataloging and Indexing Program (C&I) and Federal Depository Library Program (FDLP).
General note	GPO Historic Shelflist Project- publication not in hand.
Bibliography note	Includes bibliographical references.
Other edition issued	Revision of: Upgrading metal-finishing facilities to reduce pollution. Washington, D.C. : U.S. Environmental Protection Agency, Technology Transfer, 1973
Issued in other form	Online version: Upgrading metal-finishing facilities to reduce pollution. Rev.
GPO item number	0473-C-01
Govt. docs number	EP 7.10:M 56/NO.1-2/974

Availability

Library	Location	Call Number	Status	Item Actions
Joyner	Fed Docs Stacks	EP 7.10:M 56/NO. 1/974	✔ Available	Place Hold
Joyner	Fed Docs Stacks	EP 7.10:M 56/NO. 2/974	✔ Available	Place Hold

Upgrading metal-finishing facilities to reduce pollution.

Click here for more information about this title

Availability